This method requires less expertise than the hand spray-up method and results in higher strengths than with vibration casting.įind contractors who work with GFRC near me.Ī handheld electric mixer works well for GFRC. Sprayed premixed GFRC, with chopped fibers in the mix, requires a peristaltic pump and a special spray head.This is a much simpler method, but requires water-tight molds and doesn't work well with rock molds. Vibration casting uses premixed GFRC poured into a mold and vibrated to achieve consolidation.It does, however, require experienced workers, expensive equipment, and rigorous quality control. This mix has a higher fiber content (4 to 6%) than can be achieved with premix and is the recommended method for larger panels. With the direct spray-up method, you need a concentric chopper gun, which is fed by a spool of GFRC roving pulled into the chopper gun and blended at the nozzle. This is how most precast GFRC architectural cladding panels are made and also most ornamental precast GFRC. The traditional, and perhaps still the best, way to manufacture precast GFRC elements is by hand spraying the GFRC into a mold.There are three methods for making concrete elements using GFRC: traditional hand spray-up, vibration casting, and sprayed premix. Larger architectural elements are created by directly spraying the premixed GFRC into a mold. Recently, decorative concrete artisans have discovered the benefits of GFRC for decorative panels (such as fireplace surrounds), concrete countertops, and artificial rock work. GFRC has been used for the past 30 years to produce many concrete products, especially thin architectural cladding panels, but also for ornamental concrete such as domes, statues, planters, and fountains. In the 1970s alkali-resistant (AR) glass fibers were perfected by Owens-Corning and by Nippon Electric Glass (NEG) leading to a rapid increase in applications. The original GFRC in the 1940s rapidly lost strength as the glass was destroyed by the alkaline environment. You may have heard of concrete being damaged by alkali-silica reactivity (ASR) when there is reactive silica in the aggregate. The problem with using glass fibers as reinforcement for concrete is that glass breaks down in an alkaline environment-and there's almost nothing more alkaline than concrete. Concast Studios in Oceano, CAĪrtificial rocks made with GFRC look real at a fraction of the weight. NEG AmericaĬountertops with integral sinks remain crack free when made with GFRC. GFRC can be used to create durable and exquisitely detailed ornamental concrete.
0 Comments
Yet, when all of the quarters come together, you get a wall full of complete circles. Each student receives only one-fourth of a circle. Let your dots create community.Īlthough this project wasn’t necessarily modeled after The Dot, it certainly can be incorporated into your lesson plans. This is also an ideal project for students just learning how to use watercolors. Let students each create one positive and one negative painting. Not-a-dot projects introduce the concept of positive and negative images-both which are equally appealing when hung up on the wall. Source: Tales from the Traveling Art Teacher 4. Choose neon yarn and your students will make a very bright mark indeed. You’ll need yarn, paint, and a 10×10 square of cardboard for each student. It’s also the perfect art project to sneak in a quick math lesson about circles and angles. Suitable for fourth graders and up, these stitched dots bring a pop of color to these geometric circles. Find your inner dot with this stitched string art project. The next day students fill in their circles, and on the third day, students learn shading. Day one consists of simply making the outlines. The beauty of these murals is that the students learn several art concepts, such as outlining and shading, as they progress throughout the project. Just start with a mark and make these murals. Here are some of the best The Dot activities we could find! 1. Are you a fan of The Dot by Peter Reynolds? This inspiring picture book makes a great first-day read aloud and can serve as the springboard for all kinds of creativity. Getting the Duo to a comfy and compact form has meant leaving some features off. I also get a clear message from Microsoft that size, for the Surface Duo, has been everything. Scott Stein/CNET No 5G, large bezels: Sacrifices to get to size There's a split battery and custom processors, but no 5G. There's a lot of stuff under the hood in a really thin design on the Surface Duo. "I can't tell you what Google's working on," Panay adds, "But I do believe that if companies want to pick up dual-screen or move forward, we're setting groundwork foundationally for applications to expand, to rotate the right way, to span those screens to use both screens." It's unclear, though, whether Google's plans for dual-screened devices will be in sync with Microsoft's, or if this is a momentary marriage of convenience before the relatively small group of dual-screened and folding phones maybe expands to a larger scale next year. "When dual screens come, even on folding screens, we want those APIs to flow into Android so developers can build for every dual-screen phone." "When we construct those APIs for developers, we don't just want them on Duo," Panay says. And it may affect what future devices choose to focus on, too. The dual-screen ideas and the way Microsoft handles them in apps will influence where the Surface Neo goes next year. It's unclear how many apps will optimize to use both displays (seen here). But that really depends whether the final product feels useful or awkward. It feels like a device I might use to watch something on in one screen and take notes on in another. One thing I find interesting about Duo is that it can stand up easily at a ton of angles: At least, the nonworking model I held in my hands does. For that reason, viewing big movies isn't part of Microsoft's Duo pitch, although looking at videos on one screen while doing something on the other definitely is. Panay says that size is amazing for web browsing, but the clear seam in the middle means it won't be ideal for big videos, necessarily. The two 5.6-inch displays combine for an effective 8.1 inches - I say effective because those two displays are still split by a little seam in the middle. The idea is to make web pages and documents look readable without weird reformatting, and compare to the same work being done on a laptop or tablet. The 4:3 aspect ratio on the two 5.6-inch OLED displays is meant to handle the work-friendly part. That's to allow for more durable glass and to work with Microsoft Pen without denting the screen, according to Microsoft Technical Fellow Steven Bathiche. The displays are separate rather than folding. Microsoft's angle is aiming to get those screens looking as work-friendly as possible, and make the whole thing feel easy and comfortable to use. But that's been the pitch we've heard from every other dual-screen phone- and tablet-maker. Microsoft's Duo team operates from research that says two screens are more productive than one, so Microsoft treats the dual screens like a portable pair of monitors. I listen to this over a Microsoft Teams interview done remotely, where I also get a tour of a showroom inside Microsoft's Building 87 - the same building where the Microsoft HoloLens was developed, and which I visited in person a year ago. Of course, the Surface Duo is running Google's Android software, not Windows. "The idea where I can now formally put two windows next to each other." That's what the Duo experience should be, according to Panay: familiar, not strange. "As it turns out, it might feel familiar, because there's this thing, it's called Windows," Panay says about using the two-screened Duo. Richard Peterson/CNET 2 screens: Are they better than 1? The Duo feels great to hold, even without screens. Large trigger guard for use with or without glovesĮnhanced grip texture which enables faster follow-up shots in all conditionsįully ambidextrous operating controls: slide stop lever, magazine releaseĮach MASADA comes with two standard capacity magazines or two 10 round magazines for consumers who reside in states with magazine capacity restrictions. Low barrel axis for reduced perceived recoilģ Interchangeable wrap around back-straps – S, M, L Optic ready pistol with 4 adapter plates (RMR, Venom, Delta Point and Romeo1) Integrated picatinny style accessory rail The X Compact combines the compact OZ9C receiver and a full size X grip to create a. Available in three configurations, Standard, Compact, and the X Compact. Please contact IWI US Customer Service with questions or for details.Ĥ.6″ threaded barrel with thread protectorĬlean and crisp trigger reset with a built in trigger safety Built with ZEV’s windowless Duty slide, PRO matchbarrel, and PRO Curved Face Trigger, the OZ9 Duty is tailored to meet the stringent requirements of the discerning professional user. Mounting any optic other than those listed here will risk damaging the firearm. Respective adapter plates and screws for each of these optics allow the optic to mount directly to Masada’s slide. MASADA is an optics-ready platform and is designed to be used with the Trijicon RMR, Vortex Venom, Leupold Delta Point Pro, and Sig Romeo1 optics. Featuring a built-in trigger safety, the pistol will not fire unless the trigger is pulled. with a clean and crisp break and a positive reset. The MASADA trigger has a 6 lb trigger pull. MASADA’s trigger is designed to enhance the shooter’s accuracy and safety. MASADA utilizes a modular serialized high grade steel trigger mechanism housing that can be easily removed, allowing simple and easy disassembly and maintenance. Like all IWI firearms, it is built to withstand and endure all types of military use and abuse in extremely harsh environmental conditions. MASADA’s frame is made of high strength, impact resistant fiberglass reinforced polymers. Three interchangeable wrap around back-straps coupled with the deep beavertail enabling the MASADA pistol to fit a wide variety of hand sizes. Fully ambidextrous controls and enhanced ergonomics which provide a natural and instinctive pointing grip angle. Much more than just another striker-fired pistol, the MASADA features a low profile barrel for reduced perceived recoil. IWI MASADA 9mm polymer framed striker-fired pistol was developed in order to provide an advanced solution to the modern battlefield requirements. When you select a node, the curve handles of that node and the surrounding nodes will also appear. Left-click on a node to select it, and click and drag a node to move it around on the canvas. When a path is selected, and the node tool is chosen, you will see all the nodes of the selected path. To edit paths further, you need to use the Node tool. To create segments in your path that contain curves, click and drag with the mouse when placing a point: The previous two examples demonstrated paths with straight lines. If you want to create and enclosed path, create your points by left-clicking the canvas, and then left click on the start-of-path control handle to close the path: To stop adding points, right click anywhere on your canvas, and your path will appear: To create a simple multi-line path segment in inkscape, choose the pen tool, and then left click on the canvas to create the points of your path. The default path type (and the one we are going to cover in this article) is the bezier path. The pen tool is the quickest way to create a path with Inkscape. However, if you need to create a less than standard shape in inkscape, you will need to use Paths. These objects in Inkscape allow us to create specific shapes in many different styles, based on tweaking a few variables of each object type. In our initial Inkscape tutorial, we covered the basic creation and manipulation of shapes such as stars, polygons, rectangles, spirals and circles. Grayish cobalt blue ( Friends Forever Issue #17 regular cover) Light brilliant green edges (when using dark magic) Light brilliant raspberry (season 2 onward) Pale, light grayish orchid (season 1, S5E12 in a picture, and S9E5 in a flashback) Light gambogeish gray (as a human in a non- Equestria Girls image posted by the official European Spanish My Little Pony Facebook page) Pale, light grayish olive streaks (Rainbow Power) Student at Celestia's School for Gifted Unicorns (formerly) Princess Celestia's student (seasons 1-3) Golden Oak Library librarian (seasons 1-4) Starlight Glimmer's teacher ( S5E26- S7E1) Ruler of the Castle of Friendship ( S4E26- S9E26)įounder/principal of the School of Friendship ( S8E1- S9E20) Golden Oak Library, Ponyville (seasons 1-4)įounder/leader of the Council of Friendship (S9E26) "We have the chops here creatively to take a big brand with a lot of pressure, execute on that reputation and legacy, do it well and bring it to another level," he told CBC after the show concluded its nine-season run.Twilight Sparkle's human form in My Little Pony Equestria GirlsĬastle of Friendship, Ponyville (seasons 5-9) Cody saw the success of "Friendship is Magic" as a major stepping stone for the company and Canadian animation talent as a whole. DHX Media is the Vancouver-based production company behind Hasbro's hit television series, and "My Little Pony: Friendship is Magic" producer Devon Cody told CBC News that nearly 70 different artists from DHX contribute to each episode and that just about every artist is Canadian-based. The overwhelming majority of Canadian talent involved in the show can be best explained by its production location: Vancouver, Canada (via the Toronto Star). Rebecca Shoichet, Kazumi Evans, and Shannon Chan-Kent, who sing for Twilight Sparkle, Rarity, and Pinkie Pie, respectively, were also born and raised in Canada (per IMDb). Ball similarly produced the 2014 documentary " A Brony Tale," which follows her preparations and visit to Bronycon, the annual convention for bronies.Įven the voice actors behind the ponies' singing voices have Canadian origins. Strong became an executive producer for the documentary movie "Bronies: The Extremely Unexpected Adult Fans of My Little Pony," which explores the brony phenomenon, its implications on social expectations of masculinity, and its subsequent online communities (via IMDb). While "Friendship is Magic" was the gateway to Ponyville for Tara Strong and Ashleigh Ball, the two became involved in somewhat related projects later on. "I loved playing Minty," she said in her interview. Germain voiced characters Minty, Wysteria, Scootaloo, and Thistle Whistle amongst several other minor roles (via IMDb). She told Everfree Network that by the time she had been called into the audition for "Friendship is Magic," "I'd been in, I think, maybe four generations of it already beforehand." St. Germain had an extensive history with the franchise's animated series. Magazine, "There are lots of different ways to be a girl." Rarity, who is the show's fashion-obsessed character, is "not a shopaholic. For example, Twilight Sparkle is smart and sweet, and Rarity is beautiful but not a mean girl. Magazine.įaust told Equestria Daily that the Mane Six were specifically designed to break some of those two-dimensional stereotypes in storytelling. Lame," she wrote in a personal essay for Ms. "In short, animated shows for little girls come across as boring. Faust explained how she felt that shows marketed to young girls often made fun of them and reinforced harmful stereotypes. "I'm proud that I could make a show for girls that was something that was legitimately entertaining to watch," she said in an interview with Discovery Family. With the franchise near and dear to her heart, Faust set out to create a series that accurately captured the spirit of the toys in a way that honored the original target audience for the product. Step 1: Open Environment Variables screen as shown in the above JAVA_HOME tutorial. Follow the below steps to add CLASSPATH to Windows Environment Variables. Including unnecessary libraries consume memory and affects performance. Libraries required for one java project may not be required for another java project. This approach is not recommended as you can not have different libraries for different projects. Adding CLASSPATH to Windows Environment Variables This can be achieved using -cp or -classpath options as part of JAVAC and JAVA commands.Ĭ:\myfolder>javac -cp "c:\folder1\files\abc.jar" Hello.javaĬ:\myfolder>java -classpath "c:\folder1\files\abc.jar" Helloī. The advantage of adding Class path in command prompt is that you can include or add different libraries for different projects. Setting CLASSPATH using Command Prompt or CMD
Upload file to /path-in-seafile-repo/: curl -F -F parent_dir=/path-in-seafile-repo/ Sample request with need_idx_progress=true** ** Sample response with relative_path and ret-json** ** [ Upload file to /path-in-seafile-repo/sub_path_1/sub_path_2/, Seafile will create sub_path_1/sub_path_2/ recursively if it does not exist: curl -F -F -F parent_dir=/path-in-seafile-repo/ -F relative_path=sub_path_1/sub_path_2/ Sample request with relative_path and ret-json** ** Sample response without ret-json parameter adc83b19e793491b1c6ea0fd8b46cd9f32e592fc Upload file to /path-in-seafile-repo/, if a file named 'test.txt' already exists in /path-in-seafile-repo/, replace it with the new file: curl -F -F parent_dir=/path-in-seafile-repo/ -F replace=1 Ĭurl -F -F parent_dir=/path-in-seafile-repo/ Sample request without ret-json parameter The request returns a task_id to check file indexing progress. So that the client doesn't have to wait until the file indexing is completed, which can take some time. need_idx_progress: Set to true to ask the server to index file content asynchronously after upload is finished.If this parameter is not set, the file ids will be returned in a tab-separated string. ret-json: returns a json array including file info if set to 1.The following parameters are set in the URL: If existing file is not replaced, the uploaded file will be renamed to the form "filename (1).txt". replace: whether to overwrite file when it already exists.When you upload a folder, you should set this parameter to the uploaded folder's name. relative_path: sub-folder of "parent_dir", if this sub-folder does not exist, Seafile will create it recursively.This path must be the same as the 'p' parameter you specified when getting the upload link. parent_dir : path in your Seafile repo that you want to upload local file to.file: this field contains the contents to be uploaded.The following parameters and file contents should be encoded in Multipart/form-data format. Sample request curl -H "Authorization: Token f2210dacd9c6ccb8133606d94ff8e61d99b477fd" Īfter getting the upload link, POST to this link for uploading files. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |